RC10b7 Fin Titanium Rear Stand-Off Stealth Black 10mm for RC1
Description
Strength, performance, and luster runs deep with the titanium stand-offs from JConcepts. The Fin Titanium items replace the standard parts and feature a light-weight design and with built-in pivot, accepts the stock mounting hardware. The 7mm hex based design allows installation with the most popular wrench in the RC arsenal but also tapers down to small diameters and the shock pivot area.
The stand-offs are precision machined to install neatly and allow the shocks floating freedom and just the correct amount of fore and aft movement. The inside of the item is massively undercut to reduce even more weight but still hold firm and clamp well against the shock tower.
The Fin stand-offs are light weight , and the original design brings out the glamour and quality that makes titanium one of the most sought-after exotic materials in the world. The set includes two stand-offs and can be secured with the stock hardware or available separately, #5143 JConcepts Top Hat titanium screws. The standard 3mm locknut is used to finalize the assembly and secure the shock into position.
The 10mm stand-off is a direct bolt-on part to the Team Associated RC10B7/RC10B7D vehicles and should be used on the rear shock tower.
Original JConcepts design and "Fin" styling
High-grade, machined titanium material
2nd operation machining for silver highlights
7mm Hex base material for ease of installation
The stand-offs are precision machined to install neatly and allow the shocks floating freedom and just the correct amount of fore and aft movement. The inside of the item is massively undercut to reduce even more weight but still hold firm and clamp well against the shock tower.
The Fin stand-offs are light weight , and the original design brings out the glamour and quality that makes titanium one of the most sought-after exotic materials in the world. The set includes two stand-offs and can be secured with the stock hardware or available separately, #5143 JConcepts Top Hat titanium screws. The standard 3mm locknut is used to finalize the assembly and secure the shock into position.
The 10mm stand-off is a direct bolt-on part to the Team Associated RC10B7/RC10B7D vehicles and should be used on the rear shock tower.
FEATURES:
Direct fit for the rear tower on the RC10B7/RC10B7DOriginal JConcepts design and "Fin" styling
High-grade, machined titanium material
2nd operation machining for silver highlights
7mm Hex base material for ease of installation
Manufacturer information
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
JCO51602
845937031112
Additional details
Shipping weight
0.30 ounces
8.50 grams
0.02 pounds
Package dimensions
5.75 x 4.00 x 0.25
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️