FXX 2.0 S 1/10 RWD Electric Drift Car Kit (No Body)
Description
The MST FXX 2.0 S 1/10 RWD Electric Drift Car Kit combines the centralized chassis configuration of the FXX 2.0 KMW, with a redesigned motor forward transmission configuration and front suspension system to create an amazingly progressive driving experience. This rear-wheel drive specific design is complimented by the unique MB rear suspension system that provides increased rear geometry adjustments, allowing the suspension to better handle steep drift angles with an optimized secondary reduction ratio for improved throttle control. All of these features combined create a high performance chassis that provides handling characteristics more like that of a 1:1 drift car.
CNC machined chassis with readjusted center of gravity provides better weight distribution
Updated motor mount, suspension and ATK system
The integrated steering system with redesigned aluminum alum steering connection plate updates the geometry settings to create steep front wheel steering angles, allowing for greater drift angles
Equipped with MB rear suspension system for increased adjustments and tuning possibilities
Steel CVD axle of rear transmission system
Standard realistic caliper and disc brake set
Full ball bearings
Hydraulic Dampers
width: 190mm
Drive Mode: RWD
Caster: adjustable 12 / 14 / 16 / 18 degree
Camber: adjustable 0 to -12 degree
Needed to Complete:
1/10 Drift Body & Paint
Motor & ESC
2 Channel Radio System (minimum)
Steering Servo
Shorty LiPo Battery & Charger
Wheels & Tires
NOTE:
Wheels, tires and electronics shown in photos are for illustrative purposes only and are not included. See needed to complete list below for a full list of items required to complete the model. FEATURES:
Front motor configuration creates a feel similar to a real drift car, for a more realistic driving experience CNC machined chassis with readjusted center of gravity provides better weight distribution
Updated motor mount, suspension and ATK system
The integrated steering system with redesigned aluminum alum steering connection plate updates the geometry settings to create steep front wheel steering angles, allowing for greater drift angles
Equipped with MB rear suspension system for increased adjustments and tuning possibilities
Steel CVD axle of rear transmission system
Standard realistic caliper and disc brake set
Full ball bearings
Hydraulic Dampers
SPECIFICATIONS:
Wheelbase: 257mmwidth: 190mm
Drive Mode: RWD
Caster: adjustable 12 / 14 / 16 / 18 degree
Camber: adjustable 0 to -12 degree
Needed to Complete:
1/10 Drift Body & Paint
Motor & ESC
2 Channel Radio System (minimum)
Steering Servo
Shorty LiPo Battery & Charger
Wheels & Tires
Manufacturer information
MST
1376 W. ST. MARY'S RD
Tuscon, AZ 85745
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
MXS-532183
532183
Additional details
Shipping weight
41.64 ounces
1180.50 grams
2.60 pounds
Package dimensions
3.00 x 8.00 x 16.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️