MONSTER 2 1:8TH 25V ESC WATERPROOF W / 2200KV V2 MOTOR SENSORED
Description
Brute Power and Sheer Stamina!
Castle Creations' introduction of the Mamba Monster was a break-through moment for R/C modelers wanting to experience what seemed to be unobtainable. Brute power and sheer stamina have made this our legacy "power up" for popular 1/8th scale buggies, truggies and on road vehicles and 1/10th scale monster trucks.
The Mamba Monster 2 ESC is capable of 2S LiPo to a maximum of 6S LiPo and is waterproof, which means you can run your vehicle through the morning dew, across the soggy snow or just about anywhere else you'd be interested in running a 1/8th scale RC buggy or truck.
The Mamba Monster 2 includes a coupon for a free Castle Link USB device. This allows access to the full programming suite of adjustable settings that tune and tweak your vehicle to your preferences, resulting in an incredible RC driving experience. This combo includes the Mamba Monster 2 controller and the recently updated Castle 1515-2200Kv V2 sensored motor (Sensored capabilities of the motor cannot be utilized with the Mamba Monster 2).
- Mamba Monster 2 ESC
- 1515-2200kv V2 sensored* brushless motor
- Coupon for free Castle Link USB adapter
- Driver's Ed and Quick Start Guide
- Decal sheet
ESC
- Adjustable Internal BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
- Factory equipped (30mm), fully removable cooling fan
- Waterproof design allows for use in nearly any environment
- LED error codes for common error conditions
- Convenient transmitter programming for nine common adjustable settings
- Full compatible with the Castle Link Programming Suite or the Castle Link iOS App and a B-LINK Bluetooth Adapter. (sold separately)
- Proudly Designed, Assembled and Supported in Olathe, KS USA
- Backed by Castle Creations' 1 YR WARRANTY
Motor
- Input Voltage range: 2s-6s LiPo
- Redesigned rotor and stator assemblies.
- Reduced magnetic cogging, producing less residual drag brake.
- Increased efficiency, resulting in lower temperatures and longer run times.
- Smoother start-up, reducing cogging or stuttering when starting from a stop.
- Rebuildable design allows replacement of front end bell/bearing assembly or rotor/shaft assembly.
- High-Strength Kevlar Wrap and 180C Grade Neodymium Sintered Magnets
- Oversized NMB Bearings and High-Temperature, High-Purity Copper Windings
- Castle 10 AWG, High-Strand-Count Silicone-Insulated Wire with 6.5mm Bullet Connectors
- High-Performance 0.2mm Steel Lamination Stacked Stator
- Oversized, low-resistance, gold-plated solder tabs
- Sensor board with High Quality Temperature-Stabilized Sensors
- T6 Aluminum CNC Machines Front/Rear End bell
- Proudly Designed and Supported in Kansas, USA.
- Backed by Castle Creations' 1-YEAR WARRANTY
ESC
- Input Voltage Range: MIN: 2S LiPo; MAX: 6S LiPo (25.2V)
- BEC
- Size: length: 2.09" (53mm); width: 1.93" (49mm); height: 1.44" (36.4mm)
- Weight (with no battery connector): 3.92 oz. (111.g)
- Connectors: 6.5mm female bullets for motor connection.
- Items Needed for Operation: Battery Connector required; Deans Ultra Plugs, TRA Power Connectors, E-Flite EC5, or 6.5mm Castle Connectors are recommended.
- Telemetry Link Capable: No
Motor
- Input Voltage Range: MIN: 2S LiPo; MAX: 6S LiPo Kv: 2200
- Max. RPM: 60, 000
- Motor Size: length: 2.96" (75.18mm)
- diameter: 1.57" (39.98mm); Shaft size: diameter: 5mm, length: 20mm
- Weight (w/wires): 15 oz. (452.2g); 380g without wires.
- Mounting Hole
- Connectors: 6.5mm male bullets.
Manufacturer information
Your Mamba is warranted for one (1) year from date of purchase to be free from manufacturing and component defects. This warranty does not cover abuse, neglect, or damage due to incorrect wiring, over voltage, or overloading. If you have any questions, comments, or wish to return your Mamba for warranty or non-warranty repair/replacement contact Castle Creations at: Castle Creations 402 E. Pendleton Ave. Wellsville, KS 66092 Tel: (785) 883- 4519 Email: info@castlecreations.com Fax: (785) 883- 4571 Website: http://www.castlecreations.com All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Alternate part numbers
Here are some alternate part numbers and product codes that you may find this part listed under on other sites:
Additional details
Shipping weight
25.70 ounces
728.58 grams
1.61 pounds
Package dimensions
6.00 x 6.00 x 3.00
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️