The Deep Atmo sphere Research Craft is a one-of-a-kind scientific vessel developed by Space Corps Science Division to explore the gas giants of the outer solar system. Designated DARC-1, this multi-section crewed vessel is designed for entry and maneuver within the thick atmo sphere s of a Jupiter-type gaseous planet for study and exploration. The lifting body characteristics of the DARC-1 are ideal for atmospheric flight in dense gases and for maintaining station under turbulent conditions. At the conclusion of its research mission, the DARC-1 initiates return by igniting and subsequently discarding its aft booster section to break atmo sphere and set a trajectory for its journey home. The DARC-1 first became operational in 2052 and successfully surveyed the atmo sphere s of Jupiter, Saturn, and several of their large moons before it was claimed in a tragic accident over Titan. The DARC-1 flying model rocket from Estes Industries is an expert build, being the most challenging build in the Space Corps fleet! Build each rocket in the Space Corps line to build up your skills or enjoy this model as a test of your building skills.
WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, yellow glue, medium CA glue, hobby knife, masking tape, primer (white), paint (black, gray) and clear coat (optional). (Tools, construction and finishing supplies not included. )
WHAT YOU NEED TO LAUNCH (sold separately): Porta-Pad II Launch Pad and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
Recommended Engines
B6-2, C5-3, C6-3
Projected Max Altitude
400 ft. (122 m)
Recovery System
12 in. (30.1 cm) Parachute
Length
9.3 in. (23.6 cm)
Wingspan
6.9 in. (17.5 cm)
Diameter
0.74 in. (19 mm)
Estimated Weight
2.6 oz. (73.7 g)
Estimated Assembly Time
6-8 Hours (painting and glue drying time not included)
Fin Materials
Laser cut wood
Decal Type
Waterslide
Launch System
Porta-Pad II Launch Pad and Electron Beam Launch Controller
Launch Rod Size
1/8"