46t Mod 1 Steel Spur Gear E Revo 2 XO-1
Made by Hot Racing · ERVT46M01
$29.88
Description
- Black oxide finished
- Laser etched tooth count marking
- With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
- Gear face width: 8mm
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Related parts
Additional details
| Country of origin | China |
| Package dimensions | 4.00" × 3.00" × 0.25" 10.16 cm × 7.62 cm × 0.64 cm |
| Part numbers | ERVT46M01 083745293197 XMX46M01 MXX46M01 840353324800 XRT46M01 MXXS46M01 FSC46M01 HRAERVT46M01 |
| Shipping weight | 1.41 ounces 40.10 grams 0.09 pounds |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov