Suspension Travel Limit Straps 80mm (2)
Made by Hot Racing · SLS80T0101
$6.88
Log in to add this part to a parts list to start planning your next project!
Description
Hot Racing scale functional suspension limit straps limit suspension travel on all types of off-road R/C vehicles, including rock crawlers and racers. Limit straps are used to take stress off shocks and to control suspension extension. For example, when crawling up or descending steep grades, straps tied to the center of an axle are useful to limit the suspension from unloading and the vehicle from rolling, all while keeping suspension articulation intact. From climbing, to droop control, to super scale looks, these limit straps will get you further and get you noticed!
- CNC machined aluminum clevis buckles, anodized black in color
- Mounting hardware to suit installation
- Total length end-to-end: 87mm (3.43 inch)
- Nominal strap size: 8x2.3mm (0.31x0.09 inch)
- Eyelet hole size: 3.3mm (0.13 inch) - for a 3mm screw
- Tested on extreme off-road terrain
- Strap lengths are measured from the center of the mounting holes and are accurate to +/- 3mm
- Recommendation: when ordering, choose a limit strap that is at least 5mm shorter than the shock to prevent full extension and possible breakage of shock
description revised by: SN October 26, 2015
FEATURES:
- Woven 2-ply Nylon fabric strap material- CNC machined aluminum clevis buckles, anodized black in color
YOU WILL RECEIVE:
- Two (2) 80mm (nominal length) limit strapsREQUIREMENTS:
- Installation on vehicle, custom mounting may be required- Mounting hardware to suit installation
SPECIFICATIONS:
- Length eye-to-eye: 80mm (3.15 inch)- Total length end-to-end: 87mm (3.43 inch)
- Nominal strap size: 8x2.3mm (0.31x0.09 inch)
- Eyelet hole size: 3.3mm (0.13 inch) - for a 3mm screw
COMMENTS:
- These straps are made from 200 lb. test nylon and offers minimal stretch to provide a consistent strap length and to protect against overextending shocks- Tested on extreme off-road terrain
- Strap lengths are measured from the center of the mounting holes and are accurate to +/- 3mm
- Recommendation: when ordering, choose a limit strap that is at least 5mm shorter than the shock to prevent full extension and possible breakage of shock
description revised by: SN October 26, 2015
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Related parts
Additional details
| Country of origin | China |
| Package dimensions | 5.00" × 4.00" × 1.50" 12.70 cm × 10.16 cm × 3.81 cm |
| Part numbers | SLS80T0101 840353303010 083745970463 HRASLS80T0101 |
| Shipping weight | 0.28 ounces 7.89 grams 0.02 pounds |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov