VXS12X01
Secure Lock Front Bulkhead 1/16 TRA$73.88
10+ in stock
Steel Helical Spiral Gear Set w/ Aluminum Cover Plate - Tra 1/16
Made by Hot Racing · VXS9282X02
$43.88
Description
Hot Racing steel helical spiral differential gear set for TRA 1/16 4X4 vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, and 1/16 Summit. This set is compatible with the front or rear differentials.
- Aluminum carrier cover plate is anodized red
- Precision machined helical spiral cut gears offer inherently greater
strength and smooth operation than the factory bevel cut gears
- One (1) steel 15T pinion gear
- One (1) aluminum carrier
- One (1) aluminum carrier cover plate
- Reuses TRA 7082 internal spider and carrier gears, as well as the output shaft seal and outdrives from the original differential
- Installation may require shimming for proper gear mesh. The gears should run freely without too much play and without binding. (If shimming are needed use Hot Racing W4X Shim)
- Use removable thread lock (blue threadlocking compound) on carrier screws
- Differential grease (Spl10G02)
- Carrier bearing boss diameter: 8mm
- Pinion length: ~19.5mm
- Replaces TRA 7079 ring and pinion and 7080 carrier cover plates (except for the output shaft seal)
- Shimming the differential correctly is an important step in building the perfect differential. If needed more shims may be purchased via Hot Racing part number W8X.
description revised by: SN July 11, 2016
FEATURES:
- CNC machined aluminum and hardened high carbon steel construction- Aluminum carrier cover plate is anodized red
- Precision machined helical spiral cut gears offer inherently greater
strength and smooth operation than the factory bevel cut gears
YOU WILL RECEIVE:
- One (1) steel 39T ring gear- One (1) steel 15T pinion gear
- One (1) aluminum carrier
- One (1) aluminum carrier cover plate
REQUIREMENTS:
- Two sets per vehicle- Reuses TRA 7082 internal spider and carrier gears, as well as the output shaft seal and outdrives from the original differential
- Installation may require shimming for proper gear mesh. The gears should run freely without too much play and without binding. (If shimming are needed use Hot Racing W4X Shim)
- Use removable thread lock (blue threadlocking compound) on carrier screws
- Differential grease (Spl10G02)
SPECIFICATIONS:
- Carrier width: ~23mm- Carrier bearing boss diameter: 8mm
- Pinion length: ~19.5mm
COMMENTS:
- Does not include inner differential gears. - Replaces TRA 7079 ring and pinion and 7080 carrier cover plates (except for the output shaft seal)
- Shimming the differential correctly is an important step in building the perfect differential. If needed more shims may be purchased via Hot Racing part number W8X.
description revised by: SN July 11, 2016
Related Parts
Manufacturer Information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Additional Details
| Country of origin | China |
| Package dimensions | 3.99" × 3.99" × 0.95" 10.13 cm × 10.13 cm × 2.41 cm |
| Part numbers | VXS9282X02 840353304864 083745854275 HRAVXS9282X02 |
| Shipping weight | 0.67 ounces 18.96 grams 0.04 pounds |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov