SPL10G05
High Temp Green Super Lube Grease$3.88
2 in stock
Steel Helical Spiral Differential Ring/Pinion Gear Set (37t/13t)
Made by Hot Racing · SRVO1337
$48.88
This part is discontinued and we no longer carry it.
Description
Hot Racing optional helical spiral differential gear set for the many 1/10 scale TRA vehicles. This item replaces TRA 5379X; please check your TRA manual to verify your model uses the 5379X gear set. The Hot Racing ring and pinion set is know to fit the E-Maxx front/rear diffs, the E-Revo front/rear diffs, the Rally VXL front diff, the Revo 3.3 front/rear diffs, the Slash 4X4 front diff, the Slayer Pro 4X4 front/rear diffs, the Summit 4X4 front/rear diffs, the Telluride 4X4 front diff, the T-Maxx 3.3 front/rear diffs, and the XO-1 front diff.
- Precision machined helical spiral cut gears offer inherently greater strength and smooth operation than the factory bevel cut gears
- 29T/10T high torque gear ratio reduces torque twist
- Construction: high carbon steel
- Nitride case hardened for a long-wearing gear surface and a tough core
- Compatible with the front or rear differential
- One (1) 10-tooth differential pinion gear
- Requires four (4) M2.5 flat head cap screws for installation
- Shimming may be required for optimal alignment and fit
- Hot Racing SPL10G05 high temp grease recommended
- Best to use with Hot Racing RVO11L06 or the ultimate choice RVO11MX01
- This item replaces TRA 5379X; please check your TRA manual to verify your model uses the 5379X gear set. The Hot Racing ring and pinion set is know to fit the E-Maxx front/rear diffs, the E-Revo front/rear diffs, the Rally VXL front diff, the Revo 3.3 front/rear diffs, the Slash 4X4 front diff, the Slayer Pro 4X4 front/rear diffs, the Summit 4X4 front/rear diffs, the Telluride 4X4 front diff, the T-Maxx 3.3 front/rear diffs, and the XO-1 front diff.
- For six cell power Aluminum Outer Diff Case is a must; Revo and T-Maxx use RVO11L06, Summit use SUM11LH
- Not intended for on road operation if the differential is replaced with a spool or locker
FEATURES:
- 29T/10T high torque gear ratio reduces torque twist
- Construction: high carbon steel
- Nitride case hardened for a long-wearing gear surface and a tough core
- Compatible with the front or rear differential
YOU WILL RECEIVE:
- One (1) 29-tooth differential ring gear- One (1) 10-tooth differential pinion gear
REQUIREMENTS:
- Shimming may be required for optimal alignment and fit
- Hot Racing SPL10G05 high temp grease recommended
- Best to use with Hot Racing RVO11L06 or the ultimate choice RVO11MX01
COMMENTS:
- For six cell power Aluminum Outer Diff Case is a must; Revo and T-Maxx use RVO11L06, Summit use SUM11LH
- Not intended for on road operation if the differential is replaced with a spool or locker
Related Parts
Manufacturer Information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible Vehicles (10)
Additional Details
| Country of origin | China |
| Package dimensions | 8.00" × 5.00" × 1.50" 20.32 cm × 12.70 cm × 3.81 cm |
| Part numbers | HRASRVO1337 |
| Shipping weight | 1.12 ounces 31.75 grams 0.07 pounds |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov