Wide Axle Kit - Tamiya Clod Buster
Made by Hot Racing · CB20EL08
$43.88
This part is discontinued and we no longer carry it.
Description
Hot Racing aluminum wide axle kit for the Tamiya Clod Buster vehicles (Clod, Super Clod, or Bullhead)
- Bushing support kingpins for super smooth steering action
- Smaller c-hub make it for possible 2.2 in wheel
- CNC 6061-T6 Aluminum construction, silver in color
- These tubes will increase the drive shaft strength of your Clod rock crawler
- This kit requires a linked suspension and is NOT compatible with the factory radius arm (ladder bar) suspension
- Two (2) hardened steel drive shafts
- Two (2) aluminum bevel joint side gear couplers
- Four (4) brass bushings
- Four (4) 5x8mm nylon steering bushings
- Two (2) aluminum link mounts
- Four (4) 4x12mmscrews
- One order completes one axle. Order sets to complete one model.
- This kit requires a linked suspension and is NOT compatible with the factory radius arm (ladder bar) suspension
- Gearbox flange diameter: 29.5mm (1.16 inch)
- 5x8mm bearing can be use in place of the bushing
- Replacement/spare drive axle shafts are Hot Racing SCB20EL
- Replacement/spare hardware kit is Hot Racing RCB20EL08
description revised by: SN April 15, 2015
FEATURES:
- 15mm widen track on each side (total 30mm)- Bushing support kingpins for super smooth steering action
- Smaller c-hub make it for possible 2.2 in wheel
- CNC 6061-T6 Aluminum construction, silver in color
- These tubes will increase the drive shaft strength of your Clod rock crawler
- This kit requires a linked suspension and is NOT compatible with the factory radius arm (ladder bar) suspension
YOU WILL RECEIVE:
- Two (2) aluminum extended axle tubes- Two (2) hardened steel drive shafts
- Two (2) aluminum bevel joint side gear couplers
- Four (4) brass bushings
- Four (4) 5x8mm nylon steering bushings
- Two (2) aluminum link mounts
- Four (4) 4x12mmscrews
REQUIREMENTS:
- These tubes will ONLY work with the Hot-Racing CB2108 Clod Buster steering knuckles!- One order completes one axle. Order sets to complete one model.
- This kit requires a linked suspension and is NOT compatible with the factory radius arm (ladder bar) suspension
SPECIFICATIONS:
- Approximate total length: 93mm (3.7 inch)- Gearbox flange diameter: 29.5mm (1.16 inch)
COMMENTS:
- Replaces Tamiya E1 axle tubes, BS4 drive shaft, and BS5 drive shaft- 5x8mm bearing can be use in place of the bushing
- Replacement/spare drive axle shafts are Hot Racing SCB20EL
- Replacement/spare hardware kit is Hot Racing RCB20EL08
description revised by: SN April 15, 2015
Manufacturer Information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible Vehicles (1)
Additional Details
| Country of origin | China |
| Package dimensions | 4.50" × 4.25" × 1.25" 11.43 cm × 10.80 cm × 3.18 cm |
| Part numbers | 083745354928 CB20EL08 HRACB20EL08 |
| Shipping weight | 4.50 ounces 127.58 grams 0.28 pounds |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov