Standard Hv Coreless Digital Servo, .14sec / 486.1oz @ 8.4v

The SRT CH635S is a standard-size high-voltage digital servo designed for 1/5 and 1/8 scale off-road applications where power and precision are critical. Built around a coreless motor and titanium and steel gears, it delivers 35.0 kg/cm (486.1 oz/in) of torque at 8.4V with a 0.14 second transit speed, providing the strength and response needed for large-scale buggies, truggies, and monster trucks. The servo operates on standard high-voltage power systems from 6.0V to 8.4V, features dual bearings and a direct-drive potentiometer for precision, and runs at 330 Hz with HD 4096 resolution for smooth, accurate control. Features: * Coreless motor for efficiency and low power consumption * Titanium and steel gear train for durability under high loads * HD 4096 resolution for precise centering and smooth operation * Operating voltage range of 6.0V to 8.4V for compatibility with standard and high-voltage receiver packs * 0.14 sec/60 degrees transit speed at 8.4V * 35.0 kg/cm (486.1 oz/in) stall torque at 8.4V * 330 Hz operating frequency and 2 microsecond dead band * Dual bearing supported output shaft * All-metal mounting tabs for secure installation * 25T spline output shaft * Standard dimensions (40.7 x 20.5 x 38.5 mm) fit most vehicles * Weight: 75.0 g (2.65 oz) * Operating temperature range: -10 to +60 degrees C * Connector wire length: 250 mm * Covered by SRT's 1-year limited warranty, handled by the manufacturer Includes: * 1 x SRT CH635S servo * Servo horns and mounting hardware