Carbon Cub S2 1.3m Bnf Basic

Even if you've never flown a radio controlled (RC) aircraft before, the Carbon Cub S 2 is the most versatile, capable and easiest to fly scale RC airplane yet! Based on the Carbon Cub by CubCrafters, an upgraded and thoroughly modern iteration of the classic Super Cub, and equipped with Horizon Hobby's exclusive and innovative SAFE technology, this scale reproduction makes it possible for almost anyone to learn to fly successfully. And the addition of telemetry-capable and Smart components including an ESC, battery and charger (battery and charger sold separately for the BNF Basic version), along with the option to add SAFE Plus GPS-enabled technology and the Landing Assist Sensor (LAS), makes learning to fly even easier than ever before!
The most capable, versatile and easiest to fly scale trainer based on the iconic Carbon Cub from CubCrafters
Equipped with exclusive SAFE technology that helps prevent crashes and makes it easy to learn how to fly
Beginner, Intermediate and Experienced flight modes you can easily change between at the flip of a switch
Panic Recovery mode at the push of a button to prevent loss of control and crashes
Easily upgrade to SAFE Plus GPS-enabled technology to add AutoLand, Virtual Fence and Holding Pattern
Optional and easy to install Landing Assist Sensor (LAS) available for smoother landings
Factory-installed servos, Spektrum flight controller and serial receiver
Powerful and efficient brushless power system including a 30A telemetry-capable ESC
Capable of aerobatic maneuvers including loops, rolls and upside down (inverted) flight
Robust landing gear with oversized tires for operation from a variety of surfaces
Quick and easy assemblyno glue or special tools required
Durable EPO construction that's tough yet light weight
Optional floats available for flying from water
Full line of replacement/spare parts available
Practice flying this aircraft in the RealFlight RC flight simulator
Approximate Assembly Time
Less than an hour
Approximate Flight Time
5 - 7 minutes
Band
2.4GHz
Battery
Sold Separately
CG (Center of Gravity)
2.4 - 2.7" (62 - 68mm) back from the leading edge of the wing measured at th fuselage
Charger
Sold Separately
Completion Level
Bind-N-Fly Basic
Flaps
No
Landing Gear
Floats, Large Wheels
LiPo Compatibility
3S
Material
EPO
Minimum Required Radio
4-channel
Minimum Speed Control
30A
Motor Size
480, 960Kv
Power Type
Electric
Product Length
34" (864 mm)
Propeller Size
9x6"
Radio
Sold Separately
Receiver
Included
Recommended Motor Battery
3S 2200mAh LiPo
Servos
Included
Skill Level
Level 1
Speed Control
Included
Spinner Size
1.6" (41 mm)
Transmitter Range
Full
Trim Scheme Colors
Yellow and gray
Wingspan
51" (1295 mm)