Parts lists
Log in to add this part to a parts list to start planning your next project!
Description
A classic Estes kit re-imagined.
The specially designed engine mount has two molded tabs that hold the wing elevators in the flat position during boost for nice straight-up flights. Then at apogee, the ejection charge kicks the engine mount out and snap, the two elevators move into the full up position and TAZZ spins like crazy on the way down!
Slightly larger than the original Gyroc kit Estes produced in the 1960s, this updated model features laser cut balsa wings with alignment tabs that fit into pre-cut slots in the body tube. This makes aligning the wings much easier during assembly and after the glue is dry, you also get a strong wing-to-tube glue joint.
The clever molded plastic retainers make installing and replacing the elevator actuator rubber bands very easy.
You cant count the number of spins this rocket will make on the way down, but you can count on it for lots of fun flights!
WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, yellow glue, plastic cement, hobby knife, masking tape, primer (white), paint (black, white), and clear coat (optional). (Tools, construction and finishing supplies not included. )
WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad with a 1/8 inch launch rod and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
Recommended Engines
A8-3, B6-2, B6-4, C6-3
Projected Max Altitude
700 ft. (213 m)
Recovery System
18 in. (45.7 cm) Streamer, Spin
Length
16.6 in. (42.2 cm)
Wingspan
7 in. (17.78 cm)
Diameter
.98 in. (25 mm)
Estimated Weight
1.3 oz. (36.9 g)
Fin Materials
Laser cut wood
Decal Type
Waterslide
Launch System
Porta-Pad II and Electron Beam Launch Controller
Launch Rod Size
1/8"
The specially designed engine mount has two molded tabs that hold the wing elevators in the flat position during boost for nice straight-up flights. Then at apogee, the ejection charge kicks the engine mount out and snap, the two elevators move into the full up position and TAZZ spins like crazy on the way down!
Slightly larger than the original Gyroc kit Estes produced in the 1960s, this updated model features laser cut balsa wings with alignment tabs that fit into pre-cut slots in the body tube. This makes aligning the wings much easier during assembly and after the glue is dry, you also get a strong wing-to-tube glue joint.
The clever molded plastic retainers make installing and replacing the elevator actuator rubber bands very easy.
You cant count the number of spins this rocket will make on the way down, but you can count on it for lots of fun flights!
WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, yellow glue, plastic cement, hobby knife, masking tape, primer (white), paint (black, white), and clear coat (optional). (Tools, construction and finishing supplies not included. )
WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad with a 1/8 inch launch rod and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).
Recommended Engines
A8-3, B6-2, B6-4, C6-3
Projected Max Altitude
700 ft. (213 m)
Recovery System
18 in. (45.7 cm) Streamer, Spin
Length
16.6 in. (42.2 cm)
Wingspan
7 in. (17.78 cm)
Diameter
.98 in. (25 mm)
Estimated Weight
1.3 oz. (36.9 g)
Fin Materials
Laser cut wood
Decal Type
Waterslide
Launch System
Porta-Pad II and Electron Beam Launch Controller
Launch Rod Size
1/8"
Manufacturer information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Compatible vehicles
Additional details
| Country of origin | China |
| Package dimensions | 1.25" × 5.00" × 14.00" 3.18 cm × 12.70 cm × 35.56 cm |
| Part numbers | EST7282 047776072824 |
| Shipping weight | 3.40 ounces 96.39 grams 0.21 pounds |
⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov ⚠️