Slow-Cure 30 Min Epoxy 9oz

SLOW-CURE 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE can be used for bonding if youre willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE and FINISH-CURE to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.
- SLOW-CURE 30 min. Epoxy is an equal two-part hobby adhesive that forms high strength bonds through a chemical reaction between the resin and hardener. The cured epoxy is resistant to most chemicals.
- SLOW-CURE has the highest strength of our epoxies and should be applied in temperatures above 70F
- SLOW-CURE maintains its strength in both the lowest and highest temperature ranges of our line of epoxies
- SLOW-CURE bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alcohol work as the best solvents for cleaning uncured epoxy from surfaces
- SLOW-CURE works best for forming reinforcing fillets on joints and can be mixed with microballons or other fillers to form putty-like consistency
- SLOW-CURE is waterproof and forms superior bonds if you're willing to wait overnight. It has better penetration of porous surfaces for better bonding. Full cure in 6-8 hours.
- 9 oz combined net wt. (128 g)
- Works Best On: Glass & Metal, White Foam, Water-Resistant, Reinforcing
- Works Good On: Balsa Wood, Soft Wood, Hard Wood, Fiberglass, Hard Plastics, Laminating
description revised by: SN November 25, 2019