Titanium nitride shock shaft hf
Made by Hot Racing · SHF156S
$8.88
This part is discontinued and we no longer carry it.
Description
These are Hop-Ups Front or Rear Shock Shafts from Hot Racing for HPI Hellfire.
Stainless steel construction with a Titanium Nitride (TiN) coating. Titanium
Nitride is an extremely hard, thin film coating that provides
wear resistance, reduced friction, non-stick properties, and
improved surface properties, with an attractive gold colored appearance.
Two Shock Shafts for the HPI Hellfire
Installing inside shock bodies
length: 2.7" (70mm)
diameter: 0.14" (3.5mm)Interest
Titanium nitride (TiN) is an extremely hard (~85 Rockwell C Hardness or ~2500 Vickers Hardness)1, ceramic material, often used as a coating on titanium alum, steel, carbide, and aluminum components to improve the substrate´s surface properties.
TiN has excellent infrared (IR) reflectivity properties, reflecting in a spectrum similar to elemental Gold (Au). Depending on the substrate material and surface finish, TiN will have a coefficient of friction ranging from 0.4 to 0.9 vs. itself (non-lubricated). Typical formation is a face-centered cubic crystalline structure with a roughly 1:1 stoichiometry. TiN will oxidize at 600°C (~1100°F) at normal atmo sphere , and has a melting point of 2930°C.
FEATURES:
Stainless steel construction with a Titanium Nitride (TiN) coating. Titanium
Nitride is an extremely hard, thin film coating that provides
wear resistance, reduced friction, non-stick properties, and
improved surface properties, with an attractive gold colored appearance.
INCLUDES:
Two Shock Shafts for the HPI Hellfire
REQUIREMENTS:
Installing inside shock bodies
SPECIFICATIONS:
length: 2.7" (70mm)
diameter: 0.14" (3.5mm)Interest
Titanium nitride (TiN) is an extremely hard (~85 Rockwell C Hardness or ~2500 Vickers Hardness)1, ceramic material, often used as a coating on titanium alum, steel, carbide, and aluminum components to improve the substrate´s surface properties.
TiN has excellent infrared (IR) reflectivity properties, reflecting in a spectrum similar to elemental Gold (Au). Depending on the substrate material and surface finish, TiN will have a coefficient of friction ranging from 0.4 to 0.9 vs. itself (non-lubricated). Typical formation is a face-centered cubic crystalline structure with a roughly 1:1 stoichiometry. TiN will oxidize at 600°C (~1100°F) at normal atmo sphere , and has a melting point of 2930°C.
Manufacturer Information
All warranties and guarantees, including missing items, are handled directly by the manufacturer of that item. Should there be any problem with a product, you (The Customer) will need to contact the manufacturer to obtain service. Manufacturer contact information is available upon request. We must be contacted for a return authorization number before returning items for any reason. We cannot accept returned items that have been opened or are not in their original sealed factory containers.
Additional Details
| Country of origin | China |
| Part numbers | HRASHF156S |
| Shipping weight | 0.45 ounces 12.76 grams 0.03 pounds |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov