The chassis is equipped with the VCS front suspension for better road holding and smoother suspension stroke, and drift tires are mounted as standard, so it is ready for drifting out of the box.14 pieces of ball bearings are installed to make the power train friction free, resulting in higher top speed, better fuel economy, and less motor loads and heat.
If you think drifting is difficult, no worries, you have a solution. The new RX-ESC unit is equipped with a gyro socket and an adjustment volume. As soon as you install an optional gyro unit 2.0 (MZW446), you will quickly become a drifting expert. The gyro sensor detects the yaw rate of the car and automatically corrects the steering angle for you. So, even if you are not a skilled driver, you can surely enjoy smooth and fun drifting.
Also, it is very easy to adjust the gyro effect. You can increase or decrease the effect by just turning a tiny volume with a tool enclosed. No PC or any external equipment is necessary.
The set contains 20 pieces of red cones. Make a gymkhana course with them and sharpen your drifting skills!
- KT-531P Transmitter (control knobs: steering/throttle trim, steering D/R, light flashing speed)
- Full ball bearings. (14 pieces)
- MA-020 based chassis with VCS front suspension
- 20 pieces of 25mm-height red cones included.
- Gyro control volume equipped on the RX unit for optional gyro unit
- Socket for Optional LED Unit (MZW429R) equipped on the RX unit.
- Scale: 1/27.6
- length: 166.0mm
- width: 70.0mm
- height: 52.0mm
- Wheelbase: 98.0mm (LL)
- Tire Diameter (F/R): 25.0mm/25.0mm Tire width: (F/R):8.5mm/8.5mm